These bonnet support rubbers fit to the front shroud of all Austin Healey BN1 through BJ8 models. They cushion and stabilise the bonnet when closed, preventing metal-to-metal contact and ensuring correct panel alignment. Typically 4–6 rubbers are required across the shroud to support the bonnet evenly.
Installation requires the correct rivet (BON127) and buffer washer (BON128), which secure the rubbers firmly to the shroud.
Suitable for all Big Healey models from BN1 through BJ8. No exclusions or early chassis variations – all cars used this support rubber arrangement.
Fitting requires drilling or cleaning out the existing mounting holes in the front shroud. Each rubber is riveted in place with BON127 and backed by BON128. Installation is straightforward but may require access behind the shroud panel.
Unlike improvised solutions, this part is dimensionally correct and uses the same fixing method as the original Healey design. Choosing the correct rivet and washer ensures durability and prevents premature loosening.
No. The rivet and washer are sold separately. See BON127 Rivet and BON128 Washer.
Yes. All BN1 through BJ8 Healey models used this support rubber design.
Typically 4–6 support rubbers are fitted along the front shroud to support the bonnet evenly. Check your existing shroud for the correct number of mounting holes before ordering.
Not recommended, as it will not replicate the correct seating or spread the load as intended. Use BON127 and BON128 for accurate fit.
