This bonnet sealing strip fits along the rear edge of the bonnet on Austin Healey BN4 through BJ8 models. It creates a seal between the bonnet and the scuttle panel, helping to prevent water ingress, reduce vibration, and limit the passage of fumes from the engine bay into the cabin area.
The strip features an internal metal reinforcement with serrated teeth that grip firmly onto the bonnet edge. This design allows it to stay secure under normal use without the need for separate clips or adhesive.
Correct for all Austin Healey Big Healey models BN4 through BJ8. Not suitable for BN1 and BN2 models, which used a different bonnet-to-scuttle sealing arrangement.
The sealing strip is designed to push directly onto the rear edge of the bonnet. The internal metal core grips the bonnet flange without additional fixings. For best results, ensure the panel edge is clean and smooth before installation. The strip can be tapped gently into place with a rubber mallet for an even, secure fit. Adhesive may be added if extra security is desired, but it is not generally necessary.
This sealing strip uses the correct self-gripping profile, eliminating the need for separate clips or glue. Unlike generic rubber strips, it locks securely to the bonnet edge, maintaining a tidy finish and long-lasting seal as per factory design.
This part is correct for BN4 through BJ8. It is not suitable for BN1 or BN2 models, which used a different sealing arrangement.
No. The strip has an internal metal core with serrated teeth that grip the bonnet edge securely on their own. Adhesive can be added for extra peace of mind but is not required.
Yes. The sealing strip is supplied in a length suitable for one bonnet and should be cut to fit during installation.
Yes. By cushioning the contact between the bonnet and scuttle panel, it helps reduce vibration and noise while driving.
