This front coil spring is for late Austin Healey Sprite MK3 models from chassis HAN8[C]60260 onwards and Sprite MK4 models. It is a replacement spring for the standard front suspension and is intended to restore correct ride height, front-end balance, and suspension movement where the original spring has weakened over time.
The late front spring differs from the earlier version. This spring has a free length of 9.875" and a spring rate of 277lb, so the model split must be checked carefully during selection.
Spring issues are not always obvious, especially when ride height changes gradually. Our Austin Healey suspension springs guide explains the common signs and how to check whether the springs are contributing.
Not suitable for Sprite MK1, MK2, or early MK3 models up to HAN8[C]60259.
Not intended for modified or non-standard suspension setups.
Front springs should be replaced in pairs to keep ride height and suspension response even from side to side.
This specification differs from the earlier front coil spring, so the chassis split must be confirmed before ordering.
Installation requires removal of the original front spring using suitable spring compression equipment and safe support of the suspension assembly.
This is a suitable job for an experienced enthusiast with the right tools and experience working on suspension systems. Professional installation is sensible where spring compression equipment is not available or where further suspension wear is uncovered during disassembly.
Using the correct late spring matters because the front suspension specification changes at HAN8[C]60260. This spring provides the correct later specification with a 9.875" free length and 277lb spring rate, helping avoid incorrect ride height or mismatched front suspension behaviour.
